Download Free Panasonic Pbx Unified Maintenance Console Usb Driver

I have loaded the PBX Unified software Version UPCMCv7.8.1.1_R14 loads on my. Students Click Here. Looks like the Maintenance console USB drivers are. Install the Maintenance Console program on your PC or Laptop. Do not connect a USB cable to the system at this time. After you install the Maintenance Console, power the system on, wait for it to boot up, and connect a USB cable from the PC or laptop to the system. (Make sure Maintenance Console Program is closed) Panasonic Telephone Systems.

Installing KX-TDA Maintenance Console 1. Copy the KX-TDA Maintenance Console setup file to a local drive on the PC. (Its icon is shown here, on the left.) 2. Double-click the setup file to run the installer. Follow the on-screen instructions provided by the installation wizard. Click [Finish]. Notes • To install or uninstall the software on a PC running Windows 2000 Professional or Windows XP Professional, you must be logged in as a user which is in either the 'Administrators' or 'Power Users' group.

• When the PBX is first connected to the PC via USB, a wizard should appear and ask you to select the appropriate USB driver. Browse for and select the KX-TDA USB driver, which is copied to the local drive during installation.

Starting KX-TDA Maintenance Console Note The screenshots shown here are for reference only, and may differ from the screens displayed on your PC. Click ' Start' ' Programs' ' KX-TDA Maintenance Console' ' KX-TDA Maintenance Console'.

Enter a valid programmer code ( INSTALLER, ADMIN, or USER), then click [OK]. Note When starting KX-TDA Maintenance Console for the first time (i.e., either when the PBX is still set to the factory default settings, or after initializing the PBX), Quick Setup can be launched automatically by entering the Installer Level Programmer Code and password. Click ' Connect' ' USB' from the menu bar. Note To connect to the PBX via USB, the KX-TDA USB driver must be installed on the PC, as explained above in 'Installing KX-TDA Maintenance Console'. Enter the password appropriate to the programmer code entered in Step 2 and click [OK].

Note The password for each programmer code is 1234 by default. Follow the Quick Setup instructions if starting KX-TDA Maintenance Console for the first time, otherwise, proceed to the next step.

The program menu appears. You may now begin programming the PBX. Notes • During long programming sessions, it is highly recommended that you periodically save the system data to the SD Memory Card. If the PBX suffers a sudden power failure or if the system is reset for some reason and all system data is lost, it can be restored from the SD Memory Card. To save the system data to the SD Memory Card, either click the ' SD Memory Backup' icon, or exit KX-TDA Maintenance Console and click 'Yes' to save when prompted. • When programming PBX data which can be displayed on a proprietary telephone (PT) (extension names, group names, System Speed Dialing names, etc.), it is possible to enter characters which cannot be displayed on a KX-T7600 series PT.